Additional information
| VIDEO LINKS TO HEAR HOW IT SOUNDS | |
|---|---|
| INSTALL | THIS IS VERY EASY INSTALL SHOULD TAKE YOU ABOUT 40 MINS TO INSTALL THIS ITEM MAKE SURE CAR IS COOLED DOWN FROM DRIVING, CAN BURN YOUR HAND VERY EASY CHANGING THIS PART OUT!!!! TOOLS NEEDED, 3/8 RACHET, EXTENSION, 5MM ALLEN KEY/SOCKET, 13MM DEEP SOCKET, NEEDLE NOSE PLIERS, FLASHLIGHT STEP 1. FIRST YOU WILL HAVE TO JACK UP FRONT PASSANGERS SIDE OF CAR (BE CAREFUL) THE FORD ST DOESNT HAVE VERY GOOD SPOTS TO JACK UP FROM. REMOVE PASSENGER SIDE WHEEL, NOTICE STOCK BLOW OFF VALVE IS LOCATED RIGHT ABOVE THE PASSANGER AXLE STEP 2. REMOVE THE VACUUM LINE OFF FACTORY BLOW OFF VALVE STEP 3. UNHOOK FACTORY SENSOR LOCATED ON BRACKET, AND REMOVE THE 3 ALLEN KEY BOLTS AND SET BRACKET COVER TO THE SIDE AND PULL OUT FACTORY BLOW OFF VALVE, (BE CAREFULL BOV HAS A SPRING IN IT THAT CAN SHOOT OUT) STEP 4. NOW YOUR READY FOR ADAPTER, TAKE FACTORY BLOW OFF VALVE AND PUT IT ON TOP OF BLOW OFF VALVE ADAPTER, ALIGN THE 3 HOLES AND ADD YOUR FACTORY BRACKET ONTOP AND USE NEW ALLEN BOLTS PROVIDED (LONGER) AND INSTALL THE BLOW OFF VALVE BACK ON CAR WITH ALLEN KEY. STEP 5. RECONNECT FACTORY PLUG/SENSOR TO BRACKET AND CONNECT FACTORY VACUUM HOSE. ALL DONE!!!!! NOW ENJOY THE PUUUUSSSSSSHHHHH NOISE!!!!!! YOUTUBE VIDEO THAT WILL HELP YOU: https://www.youtube.com/watch?v=AExA1OIigjk |
